NON-RUST ANCHOR SCREW L - 2 1/4" (57 mm)
- View all variations as list
| Details | DIAMETER | Availability | Price | ||
|---|---|---|---|---|---|
|
CONCRETE ANCHOR
|
|
£26.60 | ||
|
LENGTH 2 1/4" (57 mm)
|
|
£30.85 |
BOX of 50 SCREWS
SELECT DIAMETER from Dropdown
LENGTH 2.25 INCHES (57 mm)
DRILL BIT INCLUDED
- HEX HEAD--Can be driven with Hex Driver
- SELF-TAPPING-Taps threads directly into masonry and requires no other anchor
- DIAMOND POINT-Easier to drive the screw to save time
Applications
The Anchor is made from 410 Stainless Steel, and is Silver Climaseal Coated. This anchor is designed for use in Concrete, Block, and Brick.
Environment
The anchor is designed for use in a Moist environment.
Head Style - Flat Countersunk Phillips Head
Driver Required
A #2 phillips bit is required for driving the anchor into the base material.
Minimum Embedment 1 INCH
The minimum anchor embedment into the concrete is 1". Therefore, the anchor must be installed so that a minimum of 1" of the anchor is embedded into the concrete.
Maximum Fixture Thickness
The maximum fixture thickness or the maximum thickness of the material being fastened for a anchor is 1/4". This will ensure that the minimum embedment of 1" will be met.
Each anchor must be spaced a minimum distance of 4" from each other when measured center to center.
Edge Distance
It is very important not to install the anchor any closer than 3" from an unsupported edge of the concrete.