This machine takes full advantage of the reliability and consistency of Premixed Bags. It adds Set and Forget convenience. You only have to set the Water Inflow to match the Mix Discharge Rate. From there, it's just a question of loading the Bags.
Perfect for DIY and Handyman work.
Note: Remember that this Machine has Winterization Procedures (See Photos)
When working with Dry Mixes, always remember Silica Prevention and to wet down the bags afterwards!
We recommend a Disposable N95 with an Exhale Valve, so as not to build up heat for the one lifting the bags of mix.
The 3M 8511 is widely used for this type of activity.
Recommended Mixes:
Concrete
Mortar
Stucco
Grout
Poolkrete
Maximum Half Inch Aggregate Stone (and Gravel)
Concrete Vermiculite ‘Tuck Pointing’ (non-aggregate mixes need to be used with less water)
NOT Recommended Mixes:
Self-Levelling Products
Air Crete Foam Crete
Epoxy products
Overall Length: 66.5 in. Overall Width: 22.5 in. Overall Height: 35 in. Chute Height: 16 in.
Weight: 145 lbs.
Hopper Capacity: 120 lbs.
Body Construction: 14 Gauge High-Strength Steel
Frame Construction: 1 in. Steel Pipe
Tires: Marathon Flat-Free
Electrical Requirements: 120-volt
Cord Length: 3 ft. Running Amps: 1.6
Motor HP: 1/2 HP Motor Protection Rating: IP55