YJINGRUI Hand Held Concrete Vibrator 5Ft 110V Electric Concrete Vibrating Shaft Rod 3000 Vibrations per Minute 800W
- ◄Parameters►① Voltage: 110V; ② Power: 800W; ③ Diameter: 35mm(1-3/8 inches); ④ Shaft Length: 1.5m (5 ft) / 2m(6.6 ft); ⑤ Vibration Frequency: 3,000 VPM; ⑥ Weight: 6.5kg
- ◄Fast heat dissipation►3D stereo cooling system, better heat dissipation and long working hours.
- ◄Pure copper wire motor► The copper coil has a small resistance and generates less heat during use, so the motor is not easy to break down.
- ◄High-frequency vibration► The vibration speed can reach 3000 times / min. The same area takes less time which is power saving.
- ◄Wide range of applications► It can be used in building construction, highway guardrail construction, bridge construction and Roman column making.
Product Description
YJINGRUI
- YJINGRUI is a manufacturer specialized in machinery products.
- Our company adheres to the principle of "customer first, quality first".
- We hope you have a good shopping experience.
Package lists:
- 1 x Concrete Vibrator
- 1 x 1.5m Copper Shaft Rod
- 2× Spare Carbon Brushes
- 1 × English User Manual
Product Parameters
- Voltage: 110V
- Power: 800W
- Speed: 3000rpm
- Vibrating shaft rod length: 1.5m/5ft
- Vibrating shaft rod diameter: 35mm /1.4inch
- Copper head length: 45cm /17.7inch
Instructions for use:
1. Before the vibrator moves, check whether the power phase connection is correct. After the power is turned on, if the vibrating bar does not vibrate, the vibrating rod end can generally be smashed to the ground, and the vibrating operation can be performed after the vibration emits a balanced and powerful squeaking sound.
2. When the vibrator is working, the vibrating bar should be inserted into the concrete vertically or obliquely. After vibrating for a certain period of time, the vibrating bar should be twitched up and down during vibration.
3. After the vibrator has been working for half an hour, it should be stopped for a period of time to prevent mechanical heating and even damage the machine.
4. In order to protect the flexible shaft and hose, the bending radius should be no less than 500mm.